Using This Guide - Xerox WORKCENTER 5222 Reference Manual

Using this Guide

Search the Feature Table to determine whether the feature you wish to use is supported.
Verify that the feature is supported by the platform. For example, the WorkCentre must have an optional
finisher installed to use stapling commands.
Follow across the table to find the syntax listed for the PDL examples shown. Reference the
"Dependencies/Caveats" section when working with PS and/or PCL commands.
PCL
This WorkCentre supports PCL5e and PCL XL emulations that enable the features listed in the following
table.
Feature
Job Name
Custom Paper Size
Media Size
Media Source
Output Location
Stapling
Punch
Booklet
Quantity
Resolution
Bits Per Pixel
Copies
Simplex
Duplex
Orientation
Force Short Edge
Feeding
Job Mode
Job Type
Interleaving Paper
(transparency
separator)
Job Based
Accounting
Auditron
Delayed Print
Banner Sheet
dc08cc0440
Customer Support
Description
The value for Job Name is stored for printing on the banner page.
Customer designated paper size on which to print a job.
The size of media on which to print a job.
Specifies the tray to supply the job's media.
Indicates the output bin where the completed print job is sent.
Indicates use and location of staple(s).
Indicates use, location, and number of holes to be punched.
This command enables you to print documents as booklets. The pages are
reordered sequentially and are oriented so when folded, the paging is
correct.
Use this command to specify the number of collated sets of a document.
Resolution used to image a job.
This command sets the color depth value.
Use this command to specify the number of uncollated sets of a document
in a print job.
Delivers one-sided output.
Delivers two-sided output.
Delivers output in landscape or portrait orientation.
Rotates orientation of job.
Specifies the Job Mode.
Specifies Confidential Print or Proof Print.
Insert blank media to separate sheets of transparent media.
Allows entry of an accounting code and user ID. To enable this feature the
optional Network Accounting kit is required.
Specify the time to print a job.
Turns on/off the banner sheet that prints at the beginning of every job.
Page 2