Selection & Operation Of The Modes - InnoCigs SC Invoke User Manual

220 watt e-cigarette for sub-ohm vaping with 4 ml tank volume

Table of Contents

Available languages

SC Invoke – Selection & Operation of the Modes

Switching between operating modes

With the device switched on, press the Fire button quickly 3 times to pull up the menu; with one more click, you will

open the MODE options� Press the Setting buttons to switch between the VW, TC-Ni, TC-Ti, TC-SS316, TCR (M1, M2, M3)

and USB functions (if USB is activated)� Press the Fire button to confirm each selection�

Settings in VW Mode

In VW mode, the power – depending on the atomizer head used – can be between 1 and 220 watts� Use the Up

and Down button to increase or decrease the power�

Settings in TC Mode

In the TC (Ni, Ti, SS) and TCR (M1, M2, M3) modes, the temperature can be set simply by pressing the Up or Down but-

ton after selecting the coil or memory position, while the wattage can only be adjusted in the SET subitem POWER�

Note:

1� The TC-SS mode is specially designed for the 316 stainless steel coil�

2� The TC / TCR mode supports a maximum of 1�5 ohms� The device automatically switches to VW mode when the

resistance is greater than 1�5 ohms�

3� When Kanthal wire is used in TC / TCR mode, the device automatically switches to VW mode�

Table of Contents

Chapters

Table of Contents

Do you have a question about the SC Invoke and is the answer not in the manual?