Storage And Maintenance; Cleaning; Repacking; Storage - Viewtech VJ-3 User Manual

STORAGE AND MAINTENANCE

IX

9.1 CLEANING

CLEANING THE INSERTION TUBE
1. Wipe dirt, grease, grime and liquids from the insertion tube with a
dust-free cloth.
2. Make sure that the insertion tube is completely dry before replacing
the borescope back into the case.
WARNING
Do not store the borescope in a high temperature, high humidity, or
corrosive environment.
CLEANING THE LCD SCREEN
If the LCD screen has fingerprints, grease or stains, wipe the screen with a
dust-free cloth.
CLEANING THE BA SE UNIT
Wipe the base unit with a dust-free cloth as needed.

9. 2 REPACKING

1. Return the borescope to the case carefully in order to avoid unintentional
damage to the insertion tube or camera/LED module.
2. Be sure that the joystick is in the center/neutral position and that the
bending section is straight, prior to inserting the borescope into the case.
3. When returning the borescope to the case, first place the base unit into
the case, then carefully feed the insertion tube into and around the slotted
channel in the case that is designed to house the insertion tube.
9. 3 STOR AGE
Store at normal room temperature and humidity.
22
TROUBLESHOOTING
X
If malfunctions cannot be resolved by following the troubleshooting guide-
lines below, please contact ViewTech for more detailed troubleshooting
instructions or to request a Return Merchandise Authorization (RMA) and
repair ticket:

10.1 TROUBLESHOOTING GUIDELINES

MALFUNCTION POSSIBLE CAUSES
Unable to capture images
No SD card
or video
Still showing no SD card SD card is not inserted
after insertion of SD card properly
Triggered by too high
ambient temperature
Automatic shutdown
Triggered by too low
battery level
The camera lens or LCD
Unclear image
monitor is dirty
Joystick resistance feels
high—A lot of pressure The insertion tube is
is required to move the coiled or bent too much
joystick

10. 2 REPAIR

• Please contact ViewTech before sending your borescope in for repair.
A detailed description of the problem and an overview of the operating
environment or accident that may have caused the damage will be
requested.
• Servicing and repair of this borescope is to be performed only by
ViewTech. Do not disassemble or attempt to repair this borescope, as
this will immediately void the warranty.
PROPOSED MEASURES
Install the SD card
correctly
Re-insert the SD card into
the slot
Stop using, allow unit
to cool down, and then
restart
Charge the battery
Wipe clean with a dust-
free cloth or swabs
Straighten the insertion
tube as much as possible
23