Customer Issues Resolved; The Following Customer Issues Were Resolved In 12.7 B 114; The Following Customer Issues Were Resolved In 12.6 B 101 - Xerox FREEFLOW ACCXES FIRMWARE 12.7 B 114 Firmware Release Notes

7 Customer Issues Resolved

7.1 The following customer issues were resolved
in 12.7 b 114
Issue Description
SPAR# 041643618 –
DWF markups
printed on separate
pages
SPAR# 326784478 –
Czech. Fonts in PDF
files are not printing
correctly.
SPAR 638826124 –
speckled scan to net
images
SPAR# 499374656 –
Fold programs not
correctly selected in
InstantAccxes
SPAR# 578692123 –
DWF memory
Allocation
7.2 The following customer issues were resolved
in 12.6 b 101
Issue Description
SPAR# 107111928
– Color scan to net
produced 50000013
error on scanner UI.
SPAR# 350573348
– Recall of color
scan template turns
off background
suppression and
Page 16
Problem
A DWF file with markups
would print the image and
the markups on separate
pages
Certain Czech. Fonts would
not print correctly when used
in PDF files.
Copies and Scan-to-net files
of near white paper showed
tiny dots or speckles.
The fold program selection
on the WebPMT >
InstantAccxes page did not
allow the user to select the
last two fold programs.
Certain complex DWF files
would not print and issued
an out of memory error
message.
Problem
Scanning color scan with
output format of Packbits
TIFF caused error with long
originals.
Lightness/Darkness LEDs
forced off when image type
set to color for default
template.
Resolution
The DWF interpreter was
upgraded to support
markups correctly
The Adobe Postscript
interpreter was upgraded to
support these fonts.
The TRC curve for the Wide
Format scanner was
modified to correctly
reproduce these near white
colors as white.
The InstantAccxes page was
fixed to allow all fold
programs to be selected.
The DWF interpreter was
enhanced to be more
memory efficient so the files
will now print.
Resolution
Color TIFF scans accepted
up to 10 feet.
LEDs function properly when
color selected as default
image type.