Siemens SIPROTEC 5 Hardware Description Manual page 27

6.8 Mechanical Tests
Vibration and Shock Stress in Stationary Use
Standards
Vibration Test (sinusoidal)
IEC 60255-21-1, class 2
IEC 60068-2-6
Shock Test
IEC 60255-21-2, class 1
Seismic Tests
IEC 60255-21-3, class 2 and
IEC 60068-3-3
Vibration and Shock Stress During Transport
Standards
Vibration Test (sinusoidal)
IEC 60255-21-1, class 2
IEC 60068-2-6
Shock Test
IEC 60255-21-2, class 1 and
IEC 60068-2-27
Continuous shock
IEC 60255-21-2, class 1 and
IEC 60068-2-27
The non-modular devices in the assembly frame meet class 1.
24
For technical reasons, the frequency range is raised from 1 Hz to 3 Hz at the lower limit.
25
26 The non-modular devices in the assembly frame meet class 1.
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-F, Edition 06.2019
IEC 60255-21 and IEC 60068
Sinusoidal 10 Hz to 60 Hz: ± 0.075 mm amplitude
24 60 Hz to 150 Hz; 10 m/s
and
Frequency sweep 1 octave/min
20 cycles in 3 axes perpendicular to one another
Semi-sinusoidal
Acceleration 50 m/s
Duration 11 ms
3 shocks each in both directions of the 3 axes
Sinusoidal 3 Hz
Frequency sweep 1 octave/min
1 cycle in 3 axes perpendicular to one another
3 Hz to 8 Hz: ± 7.5 mm amplitude (horizontal axes)
3 Hz to 8 Hz: ± 3.5 mm amplitude (vertical axis)
8 Hz to 35 Hz: 20 m/s
8 Hz to 35 Hz: 10 m/s
IEC 60255-21 and IEC 60068
Sinusoidal 5 Hz to 8 Hz: ± 7.5 mm amplitude
26 8 Hz to 150 Hz: 20 m/s
and
Frequency sweep 1 octave/min
20 cycles in 3 axes perpendicular to one another
Semi-sinusoidal
Acceleration 150 m/s
Duration 11 ms
3 shocks each in both directions of the 3 axes
Semi-sinusoidal
Acceleration 100 m/s
Duration 16 ms
1000 shocks each in both directions of the 3 axes
2 acceleration
2
25
to 35 Hz:
2 acceleration (horizontal axes)
2 acceleration (vertical axis)
2 acceleration
2
2
Technical Data
6.8 Mechanical Tests
223