Download Print this page
Radial Engineering Tonebone JX-2 Switchbone User Manual

Radial Engineering Tonebone JX-2 Switchbone User Manual

Advertisement

Quick Links

RADIAL ENGINEERING
3 YEAR TRANSFERABLE WARRANTY
Radial Engineering Ltd. warrants this product to be free from defects
in material and workmanship and will remedy any such defects free
of charge according to the terms of this warranty. Radial Engineering
will repair or replace at its option any defective component(s) of this
product, excluding the finish, the tube, the footswitch (tubes and
footswitches are warranted for 90 days) and wear and tear from
normal use, for a period of three (3) years from the original date of
purchase. In the event that a particular product is no longer available,
Radial Engineering reserves the right to replace the product with
a similar product of equal or greater value. In the unlikely event
that a defect is uncovered, please call 1-800-942-1001 or email
service@radialeng.com to obtain an RA number (Return Authorization
number) before the 3 year warranty period expires. Once you have
obtained an RA number you must return the product, freight prepaid,
within fifteen (15) days after the date the RA number is issued. To
make a request or claim under this limited warranty, the product must
be returned prepaid in the original shipping container (or equivalent)
to Radial Engineering or to an authorized repair centre and you must
assume the risk of loss or damage. A copy of the original invoice
showing date of purchase and the dealer name must accompany any
request for work to be performed under this limited warranty. This
limited warranty shall not apply if the product has been damaged due
to abuse, misuse, misapplication, accident or as a result of service or
modification by any other than an authorized repair centre.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN
THOSE ON THE FACE HEREOF AND DESCRIBED ABOVE. NO
WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD
DESCRIBED ABOVE OF THREE YEARS. RADIAL ENGINEERING
SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING
FROM THE USE OF THIS PRODUCT. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH MAY VARY DEPENDING ON WHERE YOU LIVE
AND WHERE THE PRODUCT WAS PURCHASED.
®
1588 Kebet Way, Port Coquitlam, BC V3C 5M5
tel: 604-942-1001 fax: 604-942-1010
email:info@radialeng.com
JX-2 Users Guide v2.0 - Feb. 2010 Part #: R870 1030 00
Specifications and appearance subject to change without notice. Copyright
© 2010 Radial Engineering Ltd.
www.tonebone.com
www.radialeng.com
True to the Music
JX•2 Switchbone
Users Guide
CAUTION: You must read this manual
before connecting this device. There is a
strict procedure to follow especially when
connecting older vintage amplifiers that are
not equipped with safety grounds.
®
Radial Engineering
1588 Kebet Way, Port Coquitlam BC V3C 5M5
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com • web: www.radialeng.com

Advertisement

loading

Summary of Contents for Radial Engineering Tonebone JX-2 Switchbone

  • Page 1 (or equivalent) to Radial Engineering or to an authorized repair centre and you must assume the risk of loss or damage. A copy of the original invoice showing date of purchase and the dealer name must accompany any request for work to be performed under this limited warranty.
  • Page 2 120V present Switch LED indicators ............7 between the amp chassis and ground. Radial Engineering takes Drag™ Control ..............8 no responsibility for this or how the JX2 is connected or used.
  • Page 3 These are designed to separate and isolate the electrical current of each amplifier and eliminate ground loops. Radial Engineering Ltd. Switchbone ™ Users Guide Radial Engineering Ltd.
  • Page 4 15. POLARITY reverse toggles output 2(B)’s polarity to bring your amps or pedals into phase. Radial Engineering Ltd. Switchbone ™ Users Guide Radial Engineering Ltd.
  • Page 5: Switch Led Indicators

    BOTH setting. This allows both gain and mid boost to be boosted as needed. flashing channel will go off. Simply adjust the boost level and away you go. Radial Engineering Ltd. Switchbone Users Guide ™ Radial Engineering Ltd.
  • Page 6 ‘re-amplify’ your amps or effects by recording a dry track, and then sending the signal to the Radial X-Amp which converts low-impedance signals to high-impedance guitar signals. The X-Amp would then be connected to the Switchbone Radial Engineering Ltd. Switchbone ™...