Page 1
THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of the garage cabinets. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home...
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and tear. This full warranty gives you specific rights, and you may also have other rights, which vary state to state. Contact the customer service team at 1-888-HD-HUSKY or visit www.huskytools.com.
M6 x 16 hex socket head screw NOTE: Hardware not shown to actual size. M6 x 40 hex tapping bolt M6 Flange Nut Washer Plastic nail Shelf support Leveler Adjustable foot Safety bracket Safety strap Grommet Plastic cover WWW.HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Page 4
Internet # 320327 head screw Shelf for wall cabinet 241292 306907980 M6 x 40 hex tapping Shelf for base cabinet 241321 320328 Husky 3-pc set bolt Mounting bracket (1 Door Unit) 120634 M6 Flange nut 323085 Lock 304246 Washer 324050...
Page 5
Part # Quantity Part # Quantity Description Description 307245315 M6 x 16 hex socket 48 in. work surface 572056 Husky 48 in. 320327 head screw L bracket 241122 Work Surface Plastic nail 314257 WWW.HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Page 6
Internet # 241292 Shelf for wall cabinet M6 x 40 hex 306605243 320328 241321 Shelf for base cabinet tapping bolt Husky 5-pc set Mounting bracket 120634 323085 M6 Flange nut (2 Door Units) Lock 304246 324050 Washer 304213...
X 16 each INSTALLING THE GROMMETS Use the short side of the hex wrench to pry out the knock-outs of your desired cord access holes. Then install the grommets (KK) into those holes. After installation WWW.HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Page 8
Assembly (continued) INSTALLING THE SHELVES Insert shelf brackets (FF) into the slots at the desired heights and place the shelves over the shelf brackets (FF). Slots on the inner front Slots on the inner back side of side panel side of side panel Shelf Shelf support (FF) x 12...
Page 9
Once properly inserted, completely close the drawer to set the slides in their proper positions. WWW.HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Page 10
Assembly (continued) CONNECTING TO THE WALL View from cabinet top The M6 x 40 hex tapping bolts (BB) CAUTION: should be drilled into the stud of the wall. Wall Bolt the safety bracket (II) with two screws (BB) to the stud in the wall.
Page 11
Insert two L brackets (N) into the slots on the locker side and attach them with four plastic nails (EE). If the base cabinets have casters, use it. If the base cabinets have adjustable feet, use it. WWW.HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Page 12
Assembly (continued) Attach the work surface on the L brackets (N) with four screws (AA). Make sure the side with Husky logo faces the front. Use two screws (AA) on each side. IMPORTANT: The side with HUSKY logo should face the front.
Maintenance Check the safety strap periodically for tightness. Tighten it when necessary. WWW.HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Page 14
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 5 p.m., EST, Monday - Friday, 1-888-HD-HUSKY WWW.HUSKYTOOLS.COM Retain this manual for future use.
Need help?
Do you have a question about the GS05403-1D and is the answer not in the manual?
Questions and answers