Table of Contents
Advertisement
When it needs to manually switch to the channel, the BYPASS signal status must be green
or yellow.
Press this button. The BYPASS key would be green or yellow flashing.
Press the button to switch, the BYPASS key is red. The PGM output signal switchs to the
BYPASS signal. PGM output and SRC would change from red to green.
When the automatic switching state is turned on (using the combination key SHIFT +
BYPASS to turned on/off the automatic switching), the current SRC input signal source is
detected un-normal, then the signal would automatically switch to the BYPASS channel.
The BYPASS key changes from green to red.
SHIFT Combination key
1.
Key Description
Note: Only the IRS1604 series support this function.
It can be used with some of the original function key. SHIFT + BYPASS, turn on / turn off
the automatic switching function.
Standby signal loss alarm: SHIFT + SRC key.
2.
Instructions
Press the Shift + SRC keys. At this time, the SRC button state would change from the
previous color to red flashing. Then press the TAKE button. The SRC channel keys will be
defined as standby signal, and when the signal is lost, the key would be yellow flashing to
alarm.
Chapter 7 Network Control
The default IP is 192.168.1.86.
STATUS:
Display the status.
ROUTER:
Setup the Matrix switcher.
REMOTER:
Setup the remote control panel.
SYSTEM:
Setup thesystem.
20
Advertisement
Table of Contents
