Lights - Toyota Urban Cruiser Brief Manual

Instrument cluster
Main Indicators*
The indicators inform the driver of the operating state of the vehicle's main systems.
Turn signal
indicator
Main Warning lights*
Warning lights inform the driver of malfunctions in any of the vehicle's systems.
*
1
* These lights turn on when the engine switch is turned to the ''ON'' position (without smart entry & start
1
system) or the ''ENGINE START STOP'' switch is turned to the IGNITION ON mode (with smart entry & start
system). They will turn off after the engine is started.
There may be a malfunction if a light does not come on, or if the lights do not turn off. Have the vehicle
inspected by your Toyota dealer.
*: For details, please see your Owner's manual, Chapter 2-2.

Lights

Headlight
high beam
*
1
*
1
Tail light
indicator
* *
1
*
1
The headlights can be operated manually
The front position, tail, license plate lights turn on.
The headlights and all lights listed above turn on,
normal driving.
Turning on the high beam headlights
1. With the headlights on, push the lever away to
turn on the high beams.
Pull the lever back to the centre position to turn
the high beams off.
2. You can flash the high beams with the headlights
on or off by pulling the lever towards you, and
releasing it to turn them off.
Front fog light
indicator
*
1 1
Rear fog
light indicator
*
1
9