Page 1
Lighting Eldningsinstruktion Heizinstruktionen Fyringsinstruksjon Instructions Fyringsvejledning Istruzioni per l’accensione Instructions d’allumage Stookinstructies Lighting Instructions Lämmitysohjeet C 600 www.contura.eu...
Page 2
Lighting Instructions Choice of fuel Lighting the fire It is important to use the right amount of wood, especially when first kindling the fire. Before lighting the fire for the first time, All types of wood such as birch, beech, oak, elm, ash, softwoods and weigh the wood on kitchen scales to get an idea of how much 2.5 kg wood from fruit-trees can be used as fuel in the stove.
Page 3
Lighting Instructions Stoking the fire. Important! When the stove is new For effective control of the heat output, it is important to have Oily coatings on the metal, and paint left on the metal components a thick bed of glowing embers and a high temperature in the may produce a distinctive smell when the stove is new.
Page 4
Poor draught in the stove after installation. Abnormally large soot deposits on the glass. • Check the length of the chimney so that it meets NIBE’s A certain amount of soot will always accumulate on the glass. These recommendations, that is a total length of at least 3.5 metres.
Need help?
Do you have a question about the Contura C 600 and is the answer not in the manual?
Questions and answers