Advertisement
4
1.3
Position the Hanger Rod grooves
outward, then slide the Lower
Mounting Bracket Hanger Rods
into the Hanger Rod Clamps.
ACCESS LADDER INSTALLATION
INSTALLER NOTE: For an accurate installation, it
is recommended the vehicle that is receiving this
ladder be sitting on as level of ground as possible.
PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: 651-552-8554 ▪ 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email:info@primedesign.net ▪ www.primedesign.net
TM & © 2015 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.'s 6092974, 6764268, 6971563, 2364879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING
1.2
A
B
2.1
Starting at the inner door
seam (A and B), measure
horizontally outward
approximately 10.00"
2.2
Using a wax or grease
pencil, make marks at
the top (A) and bottom
(B) of the door at 10.00"
1.4
Do not tighten until
Steps 2.5-2.8
1 1
1 0
9
8
7
6
5
4
3
2
1
Advertisement
