Table of Contents
Advertisement
4. Enter the IP Address of the server that you want the Internet users to be able to
access.
5. Configure as many entries as you would like until all the link entries are filled.
6. Click the "Apply" button to save the settings.
Application to Configure: You can choose one of 10 applications to configure.
Name: Enter the desired name in the column.
Status: Choose Enabled to enable it or Disabled to ignore.
IP Address: Set IP addresses to be detected by users.
WAN Address: If more than one Alias Address is set in section 3.2.5 the Alias IP Setup,
you can get multiple WAN IP addresses to choose. The following screen will
appear with a pull-down column in WAN Address.
11Mbps Wireless Internet Broadband Router
Figure 3-30 Virtual Server Setting Menu Screen
39
Advertisement
Table of Contents
