Firewall Setting - Xerox 2314 User Manual

button. DHCP Setting:
Do you want to enable DHCP Server on this router?
Click the "Enable" option to enable the DHCP server. Note that you can't have two
DHCP servers on the network at the same time. Set the router's DHCP option to
"Disable" if you already have one DHCP server on your network.
Number of DHCP Users
Enter the maximum number of PC that you want the DHCP server to assign IP
addresses to, with the absolute maximum being 253.
Starting IP Address
Enter a numerical value for the DHCP server to start with when issuing IP address.

3.5.3 Firewall Setting

NAT allows all of the computers on your network to use one IP address.
Hacker Attack Protect keeps your network away from hacker attacking.
Block Hacker Scan is used to hide the router so that the hackers won't find it on the
network.
11Mbps Wireless Internet Broadband Router
Figure 3-26 DHCP Setting Menu Screen
35