Periodic Maintenance Operations; Product Disposal; Battery Disposal - Nice Sole KIT Instructions And Warnings For Installation And Use

Hide thumbs Also See for Sole KIT:

Instructions and warnings for installation and use (14 pages)

Table Of Contents

Table of Contents

Available languages

• The automation control unit does not turn on and the led

remains off.

This may be caused by incorrect connections or electric wires not

fully inserted. Otherwise the battery may be totally discharged, in

which case no signal can be sent: in this case a rapid recharge is

required by means of power supply unit (mod. PBC2) or wait for the

photovoltaic panel (connected correctly) to recharge the battery.

• The battery tends to discharge too quickly.

This may depend on excessive ageing of the battery, in which case it

should be replaced; otherwise it may be due to excessively intensive

use of the automation, over the application limits envisaged in this

manual, found in chapter 3.

Otherwise the automation may not be compatible for operation with

SoleKIT, or the automation is incorrectly configured for low con-

sumption, or too many accessories are connected.

In general, this product does not require special maintenance; how-

ever, regular checks over time will ensure system efficiency.

Therefore, to ensure correct maintenance, check every 6 months

that the photovoltaic panel has not accumulated dirt (leaves, sand,

etc.) as this may reduce efficiency.

Also check whether battery replacement is required, as the ageing

process reduces autonomy over time.

Take into account that battery lifetime is influenced above all by high

summer temperatures, which accelerate part ageing. Normally the

average lifetime is approx. 4-5 years; this also depends on the inten-

sity of automation use: The ideal situation is to avoid excessive dis-

charging of the battery due to very frequent and repetitive manoeu-

vre cycles over periods of time.

Product disposal

This product is an integral part of the automation and there-

fore must be disposed together with the latter.

As in installation, also at the end of product lifetime, the disassembly

and scrapping operations must be performed by qualified personnel.

This product comprises various types of materials: some may be

recycled others must be disposed of. Seek information on the recy-

cling and disposal systems envisaged by the local regulations in your

area for this product category.

Caution! – some parts of the product may contain pollutant or haz-

ardous substances which, if disposed of into the environment, may

cause serious damage to the environment or physical health.

As indicated by the symbol alongside, disposal of

this product in domestic waste is strictly prohibited.

Separate the waste into categories for disposal,

according to the methods envisaged by current

legislation in your area, or return the product to the

retailer when purchasing a new version.

The product also contains a lead battery, i.e. an element that is high-

ly pollutant if not disposed of correctly. The battery must be removed

and disposed of as specified in the paragraph "Battery disposal".

Caution! – Local legislation may envisage serious fines in the event

of abusive disposal of this product.

5 – English

IS0492A00MM_29-11-2016_SOLEKIT.indd 5

WHAT TO DO IF... (troubleshooting guide)

• The battery no longer recharges.

This may be due to a malfunction of the photovoltaic panel caused

by incorrect installation, incorrect cable connections, or malfunction

of the battery.