LG B30AWYN7G5A Manual page 47

Ceiling Concealed Duct
11. E.S.P.(External Static Pressure) setting for
Function code,
ESP code
ESP value
• Please be careful not to change the ESP value for each fan step.
• It does not work to setup ESP value for very low/power step for some products.
• ESP value is available for specific range belongs to the product.
Select ESP fan step again by using
6
button and setup ESP value, as No. 4
and 5, that corresponds each wind flow
Press button to save.
7
Press button to exit.
8
❈ After setup, it automatically gets out of
setup mode if there is no button input
for 25 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
Inverter
50Hz/R410A
_ 37