Summary of Contents for Southworth PalletPal Spring
Page 1
(also covers PalletPal II and Stainless Steel units) NOT FOR PalletPal Model # ______________________________________________ Serial # ______________________________________________ Placed in Service ______________________________________ Southworth Products Corp P.O. Box 1380, Portland, Maine 04104-1380 Phone 800/743-1000 or 207/878-0700 Fax 207/797-4734 www.SouthworthProducts.com Service@SouthworthProducts.com NOVEMBER 2016...
Page 2
360 Level Loader'. Please note: This manual was current at the time of printing. To obtain the latest, most updated version, please contact Southworth’s Customer Service Department or go to our website: www.SouthworthProducts.com, under the Parts & Service tab you will find a complete list of current owner’s manuals to print.
It is the responsibility of the user/purchaser to advise the manufacturer where deflection may be critical to the application. Repairs All repairs shall be made by qualified personnel in conformance with Southworth’s instruc- tions. Operators Only trained personnel and authorized personnel shall be permitted to operate the equip- ment.
(Caution = Yellow Background) NOTICE is used to address practices not related to per- sonal injury. (Notice = Blue Background) SAFETY INSTRUCTIONS (or equivalent) signs indicate safety-related instructions or procedures. (Safety Instructions = Green Background) PALLETPAL SPRING OWNER'S MANUAL 5...
The unit must be installed on a firm, nearly-level and Southworth shall not be liable for any loss, injury, or surface. The frame of the unit must sit firmly damage to persons or property, nor for any direct, indirect, on the floor, and the floor must be level.
Stay clear of the rotating ring when it is moving. As the pallet turns, a part of the load may rotate around and hit you. Never turn the load when anyone is standing beside the unit. Fig. 2. Pinch Points PALLETPAL SPRING OWNER'S MANUAL 7...
Check the floor surface carefully and make sure The edges are sharp. Wear safety glasses and that it is free of all loose debris and dirt. gloves when you handle or cut the banding. Table 1 - Spring selection chart PALLETPAL SPRING OWNER'S MANUAL 9...
If you have any questions about the steps in the instal- large orange spring is always placed near the rear of the lation process, please call Southworth Customer Service at unit, in the position closest to the hinge. Figure 4 shows the 1-800-743-1000.
Be sure the load is centered on the unit. WARNING! If the load is off-center, it may shift when the rotating ring is turned. You may be hurt or the unit or load may be damaged. 12 PALLETPAL SPRING OWNER'S MANUAL...
PalletPal, but cannot support any extra weight. Remove any load from the top of the Pallet Pal. Insert the forks into the pockets in the base frame. See Fig. 9. Fig. 8 Unloading with a Fork Lift PALLETPAL SPRING OWNER'S MANUAL 13...
Wear or metal flaking from un- Normal condition caused by work-hard- No repair necessary. This derside of rotating ring. ening of metal. will stop once the rotator ring wears in. 14 PALLETPAL SPRING OWNER'S MANUAL...
Ordering Replacement Parts Southworth has carefully chosen the components in your unit to be the best available for the purpose. Replacement parts should be identical to the original equipment. Southworth will not be responsible for equipment failures resulting from the use of incorrect replacement parts or from unauthorized modifications to the unit.
Need help?
Do you have a question about the PalletPal Spring and is the answer not in the manual?
Questions and answers