Advertisement
Quick Links
Advertisement
Related Manuals for Kendall Howard Performance Series
Summary of Contents for Kendall Howard Performance Series
- Page 1 Performance Series® LAN Station / Workbench Instructions www.cablesmanager com...
- Page 2 Welcome to your new Kendall Howard Performance Series® LAN Station / Workbench. Here is a little information to get you started on assembling your LAN Station / Workbench. This instruction manual goes over the complete assembly of all four of the standard con gurations. Please pay close attention to the series that you have purchased and follow along making sure you follow the steps that only pertain to your series.
-
Page 3: Tools Needed
What’s in the Crate? Right Leg Left Leg Left Upper Shelf Support Right Upper Shelf Support Upper Shelf Channel Cross Bar QTY 2 Work Surface Back Plate QTY 1 QTY 1 Upper Shelf Lower Shelf 1/4-20 Cross Head Screw - Silver 1 1/2”... -
Page 4: Step 1 - All Series
Step 2 - ALL SERIES Step 1 - ALL SERIES Left Leg *Please note that the number of screw locations varies by the size of the bench. Picture below is of a 48” bench. Work Surface Right Leg Cross Bar(s) 1 1/2”... - Page 5 Step 8 Step 7 - ALL SERIES This completes the assembly for the 300 SERIES & 400 SERIES! Rotate Leveler(s) For the 100 SERIES & 200 SERIES *If you purchased the optional caster kit, install the casters continue to STEP 9. instead of the levelers.
- Page 6 Step 13 Step 14 100 SERIES & 200 SERIES 100 SERIES & 200 SERIES *Please note that the number of screw locations varies by the size of the bench. 1 1/2” Bolt(s) Picture below is of a 48” bench. Upper Shelves 1/4-20 Screw(s) Upper Shelf Assemblies Cross Bar(s)
- Page 7 The information contained in this document is subject to change without notice or obligation. Kendall Howard LLC assumes no responsibility for the accuracy, completeness or reliability of the information contained in this document. Any reliance placed on the information is therefore strictly at your own risk.