Programming A Run; Cycle - SCP SCIENCE NOVAWAVE User Manual

14 | NOVAWAVE - A New Category of Automated Microwave Digestion
"Program" Run

Cycle

This is the tab where a digestion run is created. It starts by creating a 'cycle', where 'racks' are then added to the cycle.
A cycle is used when programming several racks with the same method for all of the tubes per rack. It may also be used when a second
digestion is required after the addition of a second reagent.
Version 0.15.1
Press the button
'Add cycle'.
Stored runs can be loaded by pressing
the button and selecting a
'Load'
previously stored run.
is to remove selected racks or
'Delete'
cycles.
is to operate the doors and
'Manual'
applicators manual, etc.
is to start digestion.
'Start Digestion'