Yamaha HTR-5230 Owner's Manual page 30

TUNING
Automatic tuning is effective when station signals are
strong and there is no interference However, if the signal
from the station you want to select is weak, you must tune
in to it manually (manual tuning)
1
iii
Press PRESETITUNING
~
once to tune in to a
higher frequency and ..... once to tune in to a
lower frequency.
Press the button again if the tuning search does not stop
at the desired station
5 42 3
6
Press FM/AM to select the reception band (FM
or AM).
"FM" or "AM" appears on the display
• If you tune in manually to an FM station, it will be automatically
received in monaural mode to increase the signal quality
\ I,
~Cj)-:'
• Use the manual tuning method if the tuning search does not stop
at the desired station (because the signal from the station is weak)
• When tuned in to a station, the frequency of the received station is
shown on the display
Use INPUT to select the
tuner as the input source.
6
Press FM/AM to select the reception band (FM
or AM).
"FM" or "AM" appears on the display
r
1' 1
or
rtn
FMlAM
~
Use INPUT to select the
tuner as the input source.
Press TUNING MODE so that the "AUTO"
indicator lights up on the display.
. . . . AUTO
Lights up
D
Press PRESETITUNING (EDIT) to turn" ) " off.
j::
P1
or
F1/'1
16
Press TUNING MODE so that the "AUTO"
indicator goes off.
AUTO
Goes off
1--1 : 1-- II/I
II
Press PRESETITUNING (EDIT) to turn" ) " off.
II \
'-/1/1
n ,(-//
Turn")" off
Turn") "off
m
Press PRESETITUNING
~
or ..... to tune in to
the desired station.
To continue the tuning search, hold down the button
26
TUNING
Automatic tuning is effective when station signals are
strong and there is no interference However, if the signal
from the station you want to select is weak, you must tune
in to it manually (manual tuning)
1
iii
Press PRESETITUNING
~
once to tune in to a
higher frequency and ..... once to tune in to a
lower frequency.
Press the button again if the tuning search does not stop
at the desired station
5 42 3
6
Press FM/AM to select the reception band (FM
or AM).
"FM" or "AM" appears on the display
• If you tune in manually to an FM station, it will be automatically
received in monaural mode to increase the signal quality
\ I,
~Cj)-:'
• Use the manual tuning method if the tuning search does not stop
at the desired station (because the signal from the station is weak)
• When tuned in to a station, the frequency of the received station is
shown on the display
Use INPUT to select the
tuner as the input source.
6
Press FM/AM to select the reception band (FM
or AM).
"FM" or "AM" appears on the display
r
1' 1
or
rtn
FMlAM
~
Use INPUT to select the
tuner as the input source.
Press TUNING MODE so that the "AUTO"
indicator lights up on the display.
. . . . AUTO
Lights up
D
Press PRESETITUNING (EDIT) to turn" ) " off.
j::
P1
or
F1/'1
16
Press TUNING MODE so that the "AUTO"
indicator goes off.
AUTO
Goes off
1--1 : 1-- II/I
II
Press PRESETITUNING (EDIT) to turn" ) " off.
II \
'-/1/1
n ,(-//
Turn")" off
Turn") "off
m
Press PRESETITUNING
~
or ..... to tune in to
the desired station.
To continue the tuning search, hold down the button
26