Table of Contents
Advertisement
5. Installation and Removal
5.1 Antenna installation and removal
To install the antenna, insert the antenna into antenna connector and screw the antenna
clockwise. To remove the antenna, screw the antenna counter clockwise.
When installation of the antenna, giving a strong pressure to the Radio or pulling
the antenna with a strong power from the Radio can make damage on the
antenna connector, which may cause the Radio to have a critical problem.
5.2 Battery installation and removal
Removal of the battery is shown in Figure 4-2.
Slide the rear cover in the direction of the top and open the cover. And then remove the
battery. Slide and hold down, the battery is inserted. Insert the back cover to the below hole
and press the cover as shown in Figure 4-3. Then the cover will be equipped.
Figure 4-2) Battery installation and removal
Figure 4-1) Antenna installation and removal
Figure 4-3) Rear cover mounting
7
Advertisement
Table of Contents
