Table of Contents
Advertisement
1. Do not over tighten the antenna as it may cause damage to the radio
2. NEVER HOLD by the antenna when carrying the transceiver.
3. Transmitting without an antenna may damage the transceiver.
5.2 Battery Installation and Removal
As shown the figure 5-2) below, to remove the battery, press the locking latch in the direction
of arrow 1 and pull up the battery latch in the direction of arrow 2 to pull it away from the
radio.
To attach the battery, align the battery pack with the groove of the body (arrow 3) and push
the locking latch down to the direction of arrow 4. The battery latch will click shut when
locked.
5.3 Belt Clip Installation and Removal
As shown the figure 5-3) below, Belt clip attaches to the back of the radio above the
battery. To attach the belt clip, align the belt clip to the grooves on the back of the radio
and push it down to the direction of arrow 1. Clip will click when locked. To remove the
belt clip, push the belt clip locking tab in the direction of arrow 2 and pull the belt clip up
to the direction of arrow 3 at the same time.
Figure 5-2) Battery Removal and Installation
8
Advertisement
Table of Contents
