First Time Use; Keeping The Mains Cable Tidy; Filling The Kettle - Sandstrom SKET211E Instruction Manual

Brushed stainless steel kettle
Table of Contents

Advertisement

Available languages
  • EN

Available languages

First Time Use

Clean your kettle by boiling a full kettle of water twice and then discard
the water.
GB

Keeping The Mains Cable Tidy

Extend the mains cable in the kettle
stand to the required length. Locate the
mains cable slot in the stand. For safety
it is recommended that the length of the
exposed mains cable is kept as short as
possible.
This kettle must only be used with the stand provided.

Filling The Kettle

Press the open button to open the lid
and fill the kettle with the required
amount of water.
Do not exceed the maximum fill level
(Max 2.0L) as indicated inside the kettle
and not less than the minimum fill level
(Min 0.5L).
If the kettle is overfilled, boiling water may be ejected from the spout and
cause scalding.
18
slot

Advertisement

Table of Contents
loading

Table of Contents