First Use; Temperature Setting - TECHWOOD TFS-246 Instruction Manual

12. Electrical connection (back of the
iron)
13. Light indicator ring
• Before first use, remove the device and all accessories being careful.
• Clean the apparatus according to the instructions in "Cleaning and
maintenance" paragraph.
• Always, place the machine on a suitable flat, stable surface.
• When using the steam function for the first time, do not direct the steam towards
the laundry, as there could be debris from the steam vents.
We recommend the use of distilled water.
Make sure that both the Steam Control turning Knob and Temperature Control Dial
are in "OFF" position.
Hold the iron upright so that the water-filling inlet is in a horizontal position.
Fill with water through Water Filling Inlet until the water reach the "MAX" mark
indicated on the side of the iron.
Note : Never fill the tank above this mark.
Follow the ironing instructions on the garment label. If there is no instruction but
you do know the kind of fabric, please consult the following table.
Note : If the fabric consists of various kinds of fabrics, always select the
temperature required by the most delicate fabrics.
Fabric
Synthetic
Silk, wool
Cotton, linen
• Unroll the power cord completely.
• Check that the tension in force in the country where you are, corresponds to
that indicated on the apparatus.
• Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
• Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
• Never modify the appliance in anyway.

FIRST USE

FILLING WITH WATER

TEMPERATURE SETTING

Temperature logos
●
●●
●●● MAX
USE
14. Connection base / steam iron
15. Steam iron support base
Temperature requirement
Low temperature
Medium temperature
High temperature
7