Xantrex 40 A (XADC-40) Owner's Manual page 8

Towable-OEM-40-60-80A.book Page vi Monday, March 5, 2007 12:15 PM
Safety
Precautions When Working With Batteries
WARNING: Explosion or fire hazard
1. Follow all instructions published by the battery
manufacturer and the manufacturer of the equipment in
which the battery is installed. Working in the vicinity of
batteries may be dangerous. Batteries generate explosive
gases during normal operation, therefore, you must read
this guide and follow the instructions exactly before
using your XADC.
2. Make sure the area around the battery is well ventilated.
3. Never smoke or allow a spark or flame near the engine or
batteries.
4. Use caution to reduce the risk or dropping a metal tool on
the battery. It could spark or short circuit the battery or
other electrical parts and could cause an explosion.
5. Remove all metal items, like rings, bracelets, and
watches when working with lead-acid batteries. Lead-
acid batteries produce a short circuit current high enough
to weld metal to skin, causing a severe burn.
6. Have someone within range of your voice or close
enough to come to your aid when you work near a lead-
acid battery.
7. Have plenty of fresh water and soap nearby in case
battery acid contacts skin, clothing, or eyes.
8. Wear complete eye protection and clothing protection.
Avoid touching your eyes while working near batteries.
9. If battery acid contacts skin or clothing, wash
immediately with soap and water. If acid enters your eye,
immediately flood it with running cold water for at least
twenty minutes and get medical attention immediately.
vi 975-0305-01-01