Figure 3-7 Update Completion; Gma 35 Software Loading - Garmin GTN 6 Series Maintenance Manual

10. Click Finish.
11. Eject the card from the card reader or stop the card reader in Windows.
3.2.2

GMA 35 Software Loading

NOTE
The GMA 35 software will be present on the data card when creating a GTN Software
Loader Card. A separate card is not required to perform GMA 35 software updates.
1. Remove power from the GTN 7XX.
2. Insert the GTN Software Loader Card into the GTN 7XX data card slot. For instructions on how to
create a GTN Software Loader Card, refer to Section 3.2.1.
3. Hold down the HOME key until "Garmin" is fully lit on the display after power is applied to the
GTN 7XX.
4. Ensure the GMA 35 circuit breaker is closed.
5. Touch the Updates key. To display available software, touch the Updates key.
6. Touch the Updates key.
7. Touch GMA 35 Software Updates.
8. Touch Select All.
9. Touch the Updates key.
10. Touch OK.
11. When completed, remove power from the GTN and GMA 35.
12. Remove the Software Loader Card.
13. Re-insert the database card into the data card slot.
14. Restore power on the GTN and GMA 35.
15. Ensure the software was updated correctly. Refer to Section 3.3.2.
190-01007-B1
Rev. 4

Figure 3-7 Update Completion

GTN 6XX/7XX Part 27 AML STC Maintenance Manual
Page 3-5