Remote Control; Front Panel - Pro-Ject Audio Systems Box-Design DAC Box RS2 Instructions For Use Manual

Remote control

Front panel

Menu
Use any button on the right side of the unit to enter Menu, then use buttons Up and Down to browse in
Menu, button Right enters subpage or activate selected item, button Left returns to previous page or steps out
of Menu.
Display returns back to main page after 10s of inactivity.
INPUT : Direct access to inputs. See separate chapter about inputs.
UPSAMPLE :
OFF: upsampling inactive
Recommended for playing native sample rates. In such case is also recommended to disable cross
fade and start/stop fade if available in player. Setting is overrided to ALL When playing MQA files.
ALL :all data from digital inputs are upsampled to 384/352kHz
4
© Pro-Ject Audio Systems · Pro-Ject DAC Box RS2 · Revision 2020.02.05
POWER turns the unit on or back into standby
Mute activates and deactivates mute. If mute is engaged, the blue LED
above the ON/OFF switch flashes.
Upsample see Upsample article
Reclock see Reclocking article
Left arrow step back in menu
Right arrow enters into a menu or a subpage of menu
Up and Down arrow browse in menu up and down
OK confirms settings
Filter +/- selects digital filters
Input +/- selects inputs
Tube engage/disengage tube stage
+/- not used