Retractable Position; Heated Seat Control - PEUGEOT RIFTER Handbook

Refitting the armrest
► Slot the armrest into the backrest, ensuring
that you align the bayonet lugs with the holes.
► Push the armrest shaft towards the backrest.
► While holding it in this position, rotate the
armrest towards the front. The armrest is once
again secured onto the backrest.

Retractable position

► If the centre console inconveniences you,
remove the passenger's seat armrest.
► Push the control rearwards fully to tilt and
guide the assembly.
This position allows you to transport long loads
inside the vehicle with the doors closed.
When retracted, the maximum permitted weight
on the backrest is 50 kg.
► To reposition the seat cushion, raise the
backrest until it locks in the raised position.

Heated seat control

► Approximately 30 seconds after starting the
engine, press the control.
The temperature is controlled automatically.
Pressing again interrupts operation.
If you press the control while the engine
is not running, the request will be
memorised for approximately 2 minutes.
Ease of use and comfort
Do not use the function when the seat
is not occupied.
Reduce the heating intensity as soon as
possible.
When the seat and passenger compartment
have reached a satisfactory temperature,
switch the function off; reducing electricity
consumption in turn decreases fuel
consumption.
Prolonged use of the heated seats is not
recommended for those with sensitive
skin.
There is a risk of burns for people whose
perception of heat is impaired (illness, taking
medication, etc.).
To keep the heated pad intact and to prevent
a short circuit:
– do not place sharp or heavy objects on the
seat,
– do not kneel or stand on the seat,
– do not spill liquids onto the seat,
– never use the heating function if the seat
is wet.
3
39