Polytree TZ70M3V29X00 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A) Then insert the tree pole
tightly into the stand.
3. Sort all branches according to color codes marked on the end of each branch. Below is a list of the
color codes for your tree. (See Fig. B) (Please note: the number of rows may vary with different tree sizes.)
Fig. A - Tree Stand Assembly

SHAPING AND ADDING BRANCHES

1. Shape each branch by either placing the branch in a bracket which is at a comfortable level to work(Fig. 1), or
holding the branch in your hand with the hooked end pointing down. (Fig.2) BEGIN WITH THE BRANCHES AT
THE BOTTOM OF THE TREE AND WORK UP TOWARDS THE TOP.
2. When shaping each branch, work from the branch hook and move outwards to the end tip of the branch. Start
by wrapping the back tip around the end of the branch stem to cover the branch wire. (Fig. 3)
3. Working from the branch's hook moving outwards, fan each tip out using this pattern: one tip to the right of the
branch's center wire, one tip to the left of the branch's center wire, one tip parallel to the branch's center wire.
(Fig. 4) Tips should be slightly offset from each other so that they do not line up exactly one behind the other. All
tips should be curved upwards when looked at from the side. (Fig. 5)
4. As each branch is shaped, place the color coded branch securely into the matching color coded bracket. (Fig. 6)
As you finish each level of branches, make sure the rows look evenly distributed to the levels above and below it.
Adjust tips as needed to even appearance. (If your tree includes branches with side wings, arrange these
branches so that the wings are on every other branch if necessary.)
5. When all the branches are shaped and put into their color coded matching brackets, shape the top section. Do
this by pulling down each row of tips in an even, circular pattern. (Fig. 7)
6. Start from the bottom layer of the tree topper and work upwards to the top tip.
7. Carefully curve each tip upwards for a natural look.
8. Insert top securely into tree's center pole. (Fig. 8)
9. Step back and take an overall look at the tree. Shift tips as needed to fill in any gaps. Slightly upsweep all branch
tips for a uniform look. Your Christmas tree is now complete and ready to be decorated. (Fig. 9)
Fig. 1 Fig. 2
Fig. 7
Fig. 6
MODEL #: TZ70M3V29X00, TZ70M3V29X01
Polytree®!
Fig.B
Fig. 3
Fig. 4
Branch
Fig. 8 Fig. 9
Carefully follow the instructions
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward and
snap into place.
ROW COLOR CODED
TREE TOP
WITHOUT COLOR
B
RED
B
RED
C
YELLOW
D
GREY
D
GREY
E
DARK BLUE
F
LIGHT BLUE
G
DARK PURPLE
Fig. 5
Side view
Please scan code to
learn how to shape
and set up your tree