Polytree L90G1M1050S Manual

FCC Verification User Manual
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
- "Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment."
- "NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, DO NOT RETURN YOUR TREE TO PLACE OF PURCHASE. Please
contact us first, call: 1-888-919-0070 (English, French and Spanish), 10:00am-7:00pm, Monday-Friday, Eastern
Time, or visit our website at www.polygoup.com.
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT
PARTS.
Model no:. L90G1M1050S
Customer Name:
Address:(No P.O. Boxes)
City & State:
Zip Code:
Day Phone:
Date Purchased:
Page: 4 of 4
2.7 m / 9 ft EZ Connect™ Dual Color LED Tree
ITM. / ART. 915690
For assistance with assembly, parts and customer service, call: 1-888-919-0070 (English, French and Spanish),
10:00am-7:00pm, Monday-Friday, Eastern Time.
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
Shape™ technology, allowing you to set up and light up your tree in less than 10 minutes! Carefully follow the instruc-
tions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand on a level surface. (See Fig. A)
Fig. A
Eye Bolt
Tree Stand Assembly
Click
Tree Stand Disassembly
Eye Bolt
Fig. B
Tree and Light Assembly
Section 5
Section 4
Section 3
Section 2
Section 1
Polytree®!
This tree assembles with EZ Connect™ and Perfect
1. Pull apart the legs of the stand so that
they are snapped into an x-shape, place the
tree stand on a level surface.
2. Then inserting the bottom section of the tree
into the assembled stand, insert and turn the
eyebolts into the stand and tighten until the
tree pole is firmly secured.
3. To close the stand, remove the eyebolts, press the metal button and
fold the legs together.
Power input
120 V, 60 Hz, 0.38 A, 45.6 W
For indoor use only
Do Not Tamper
Internal Parts
Open the
protective
cap before
assembly
Do Not Tamper
Internal Parts
Open the
protective
cap before
assembly
ON/OFF
Foot Pedal
Insert
Adapter Plug
Into Extension
Cord
Control Box
Page: 1 of 4
Insert
Green Label
Plug Into Wall
Outlet