Polytree TG76M2S85C00 Assembly Instructions

Advertisement

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
technology-Set up and light up your tree in less than 10 minutes! Carefully follow the instructions below
on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
F i g . B - Tree and Light Assembly
Section 1
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective
cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into
the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all
wires are free of branch hinges.
7. (For pre-lit trees only) Connect the plug(s) securely to the extension cord(s) as per the color labels
indicated in Fig. B and insert the green label extension cord plug into the wall outlet. Your entire tree
should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or broken, loose
or missing bulbs. Replace bulbs promptly in order to maintain the performance and life expectancy of
your pre-lit tree.
8. This tree is constructed with Quick Set® and Simple Shape technology. Shaping is not necessary; you
just need to slightly upsweep all branch tips for a uniform look (see Fig.C) and shift branches to fill any
gaps. Your Christmas tree is now ready to be decorated.
MODEL #: TG76M2S85C00
Polytree®!
Click
Section 3
Section 2
2016 TREE LETTER "C"
This tree comes with Simple Shape
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
* E le c t r i c al R a ting F or T he T r ee
( F or Ind o or U se Only)
2.04A 120 V , 60Hz
Insert Red Label
Plugs Into Red
Labeled Extension Cord
Insert
Green Label
Plug Into Wall
Outlet
Sku # 5361316

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TG76M2S85C00 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Polytree TG76M2S85C00

  • Page 1 8. This tree is constructed with Quick Set® and Simple Shape technology. Shaping is not necessary; you just need to slightly upsweep all branch tips for a uniform look (see Fig.C) and shift branches to fill any gaps. Your Christmas tree is now ready to be decorated. MODEL #: TG76M2S85C00 2016 TREE LETTER "C"...
  • Page 2 Fig. C Side view Top view STORAGE INSTRUCTIONS 1. Remove all ornaments and decorations. For pre-lit trees, first unplug extension cord from the wall outlet and then disconnect light extension cord between each section of the tree. 2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section below and fold all branches toward the pole.

This manual is also suitable for:

5361316

Table of Contents