TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
Carefully follow the instructions below on how to set up your new tree quickly and at ease:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand (Fig. A) and place on a level surface.
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Insert the pole of Section 1 into the assembled
stand . Insert the pole of Section 2 into Section 1. Insert the pole of the tree top into Section 2.
Ensure that all poles are firmly secure. Be sure that all wires are free of branch hinges.
5. Connect plugs of the same label color together, and then insert green label plug into the wall
outlet (Fig. B). Your entire tree should now be lit.
6. Shape the tree from the bottom to the top. Start with the branches farthest from the pole – fan out
in a star shape (Fig. C), and continue until the entire tree is shaped.
Fig. C
Top view
MODEL #: TV70M3AJNC06
Polygroup®!
Click
Tree Top
Section 2
Side view
2019 TREE LETTER "Z"
Sku # 5068853
Pull apart tree stand legs until they
snap and form an 'X' shape.
To close the stand, press the metal
button and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
1.02A 120V, 60Hz
Connect
Red Label
Plugs
Connect
Yellow Label
Plugs
Insert Green
Label Plug Into
Wall Outlet