Computer Setting; Adjusting The Height And The Viewing Angle - Iiyama ProLite XB3270QS User Manual

COMPUTER SETTING

 Signal Timing
Change to the desired signal timing listed on page 23: COMPLIANT TIMING.

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE

 For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor's height
and angle to your own preference.
 Hold the panel so that the monitor does not topple
when you change the monitor's height or angle.
 You are able to adjust the monitor's height up to
100mm, angle up to 45 degrees right and left, 22
degrees upward and 3 degrees downward.
NOTE
 Do not touch the LCD screen when you
change the height or the angle. It may
cause damage or break the LCD screen.
 Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
height or the angle.
 Injury can occur if care is not taken to
avoid finger contact with the displays
base when adjusting the height.
3°
45°
Monitor
Stand
BEFORE YOU OPERATE THE MONITOR 9
22°
100mm
45°