Advertisement
C
ONNECTING
S
C
/V
ETTING UP THE
AMERA
IDEO
C
P
S
ONTROLLED
OWER
UPPLY
Referring to the diagrams below and on the next page:
1. Attach the camera to a wall using the screws provided.
2. If you install the camera outdoors, make a small hole in your
exterior wall and pass the low voltage power jack through it.
3. Plug the XM10A's power supply jack into the socket on the
adapter cable from the camera.
4. Plug the power supply into any 120V AC outlet.
5. Set the channel switch on the camera to any letter A, B, C, or D
6. Adjust the antenna if necessary to aim it in the direction of the TV
or monitor that you will view the camera on.
7. Set the Housecode dial to a letter between A
and P that matches the Housecode dial on the
X10 remote controls you want to use it with. Set
the Unit Code dial to a number between 1 and
16. This lets you turn the camera connected to
the XM10A on and off by remote control (using
X10 remote controls, sold separately). See the
owner's manual supplied with X10 remote
controls for more details.
10
U
P
S
,
R
ENDER
AND
EMOTE
2.4 GHz Video
Antenna
Attach camera to a
wall, indoors or
outdoors.
Plug power
supply in here.
Set codes
wheels.
11
Set channel switch to
match setting on
Video Receiver.
Outdoors
Indoors
Plug into
any AC
outlet
Important: Unplug
power supply before
unplugging power jack.
Advertisement
