REMIS REMIfrontII-T User Information

Driver's cab blind system for ford transit from production year 2000

Advertisement

Contents:

A. Product information

A.
Product information
1. Manufacturer:
2. Designation and Type:
3. Status, Date of manufacture:
4. Possible uses:
5. Installation:
6. Function description:
7. Variants:
8. Warning:
Issue 39/2005
User information
REMIfrontII-T
Ford Transit
From production year 2000
Driver's cab blind system
for Ford Transit
Important!
Read this information carefully first.
This system is not suitable for vehicles with
airbags in the A pillars or above the doors!
REMIS GmbH
Mathias-Brüggen-Str. 67-69
D-50829 Köln
REMIfrontII-T – Cab blind system, Ford Transit
see sticker
Motor caravans based on the Ford Transit as from 2000 (vehicles without
central electronic units on the instrument panel or airbags in the A pillar
or above the doors)
see B. (Assembly information)
see C. (Operating information)
2-part vertical blind system for front windscreen and vertical blind
systems in frames for the side windows.
High degree of shade through use of almost completely opaque pleated
material.
The blinds may only be closed when the vehicle is stationary and the
engine is switched off. Before starting the journey the system must be
completely folded down and locked. Note, the handles can remain hot for
long periods if exposed to strong sunlight.
The system is not intended for shading the vehicle over long periods (e.g.
over the winter). Depending on the temperature, the material may be
temporarily more difficult to fold back.
We reserve the right to make changes
Page 1/4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the REMIfrontII-T and is the answer not in the manual?

Questions and answers

Summary of Contents for REMIS REMIfrontII-T

  • Page 1 1. Manufacturer: REMIS GmbH Mathias-Brüggen-Str. 67-69 D-50829 Köln 2. Designation and Type: REMIfrontII-T – Cab blind system, Ford Transit 3. Status, Date of manufacture: see sticker 4. Possible uses: Motor caravans based on the Ford Transit as from 2000 (vehicles without...
  • Page 2 REMIfrontII-T User information Assembly information We recommend that the blind system is installed by a specialist workshop ! No liability or warranty is accepted in cases of incorrect assembly or installation. Step 1: (Check scope of delivery) 1 front system...
  • Page 3 REMIfrontII-T User information B14: B15: Stick tube guide to NOTE! The distance the middle of the between the edge of roof next to the the roof and the edge mirror. of the carrier must be 40mm ± 2mm. B16: B17:...
  • Page 4 REMIfrontII-T User information Operating information Front system: Bend mirror back To open: Loosen handle from rest position by tilting and pulling lightly. To close: Latch in handle by pressing onto cassette. Bring handles together in the middle, magnetic catch locks blinds automatically.

Table of Contents