Polygroup TG76M2S85L04 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
and Fast Shape technology which takes less than 10 minutes to set up and light up!
TM
Carefully follow the instructions below on how to assemble your new tree quickly and at ease:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand (Fig. A) and place on a level surface.
Fig. A - Tree Stand Assembly
Fig. B – Tree and Light Assembly
Section 2
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Remove protective cap, and insert the pole of
Section 1 into the assembled stand . Insert the pole of Section 2 into Section 1. Insert the pole of
the tree top into Section 2. Ensure that all poles are firmly secure. Be sure that all wires are free of
branch hinges.
5. Insert adapter the wall outlet (See Fig. B). Your entire tree should now be lit.
6. This tree is constructed with Quick Set® and Fast Shape
you just need to slightly upsweep all tips and shift branches to fill in any gaps for a fuller, uniform
look. Your Christmas tree is now ready to be decorated.
MODEL #: TG76M2S85L04
Polygroup®!
Click
Tree Top
2019 TREE LETTER "C"
This tree comes with Quick Set®
Pull apart tree stand legs until they
snap and form an 'X' shape.
To close the stand, press the metal
button and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V-60Hz, 0.16A
Output: 29V DC 0.28A
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
Insert Adapter
TM technology. Shaping is not necessary;
Sku # 5361316
Into Wall
Outlet