TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
and Simple Shape
technology which takes less than 10 minutes to set up and light up!
TM
Carefully follow the instructions below on how to assemble your new tree quickly and at ease:
1. Choose an appropriate location near a wall outlet.
2. Assemble the tree stand (Fig. A) and place on a level surface.
Fig. A - Tree Stand Assembly
Fig. B – Tree and Light Assembly
Section 2
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Remove protective cap, and insert the pole to the
assembled stand until firmly secured. Be sure that all wires are free of branch hinges.
5. Insert green label extension cord into adaptor and adaptor insert into the wall outlet. (See Fig. B),
Your entire tree should now be lit.
6. This tree is constructed with Quick Set® and Simple Shape
you just need to slightly upsweep all tips and shift branches to fill in any gaps for a fuller, uniform
look. Your Christmas tree is now ready to be decorated.
MODEL #: TG76M2S99L01
Polygroup®!
Click
Tree Top
2018 TREE LETTER "T"
This tree comes with Quick Set®
Pull apart tree stand legs until they
snap and form an 'X' shape.
To close the stand, press the metal
button and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V, 60Hz, 0.25A Max.
Output: 29V DC, 0.45A
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
Insert Green
Label Extension
Insert Adaptor
Into Wall
Cord into Adaptor
Outlet
TM
technology. Shaping is not necessary;
Sku # 5622386