Lenovo ThinkSystem SE350 Manual page 5

Install Inner Rails on System
Note: The graphic shown below is the right rail.
Step 1. Align the mounting holes in the inner rail with the corresponding rail mounting pins on the side of the server.
Step 2. Push the inner rail as shown until the mounting pins on the server lock into place with the inner rail.
Step 3. Repeat step 1-2 on the left rail.
Notes:
• Make sure the stamp "Front" always face toward the front when assembling the inner rail to the server or to the
slide-rail assembly.
• The number of the rail mounting pins on the side of the server might be different from the illustration depending on
the server model.
Step 4. Insert and fasten the four screws on the left and right rails if needed (depending on the server model).
5 5