Table of Contents
Advertisement
Quick Links
U S E R M A N U A L
Series X - Maritime Multi Computer (MMC) Models
HD 07T22 MMC-xxx-xxxx - 7.0 inch Maritime Multi Computer
HD 13T22 MMC-xxx-xxxx - 13.3 inch Maritime Multi Computer
User Manual MMC Series X Compact
Updated: 26 Oct 2018
Doc Id: INB100485-4 (Rev 03)
Created: 363
Approved: 6987
Please visit www.hatteland-display.com for the latest electronic version of this manual.
Hatteland Display AS, Eikeskogvegen 52, N-5570 Aksdal, Norway
Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com
Advertisement
Table of Contents
Related Manuals for EMBRON Hatteland Display Maritime Multi Computer X Series
Summary of Contents for EMBRON Hatteland Display Maritime Multi Computer X Series
- Page 1 U S E R M A N U A L Series X - Maritime Multi Computer (MMC) Models HD 07T22 MMC-xxx-xxxx - 7.0 inch Maritime Multi Computer HD 13T22 MMC-xxx-xxxx - 13.3 inch Maritime Multi Computer User Manual MMC Series X Compact Updated: 26 Oct 2018 Doc Id: INB100485-4 (Rev 03) Created: 363...
- Page 2 Copyright © 2018 Hatteland Display AS Eikeskogvegen 52, N-5570 Aksdal, Norway. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Display AS.
-
Page 3: Table Of Contents
Contents Contents ..................3 Contents of package ....................5 General .................... 7 About this manual ......................8 About Hatteland Display ....................8 www.hatteland-display.com ..................8 Contact Information ......................8 Maritime Multi Computer (MMC) - Introduction ............9 Touch screen products ....................10 Product Labeling ......................12 Product Labeling ......................14 Warranty Label ....................... - Page 4 Contents Technical Drawings ..............37 Technical Drawings - HD 07T22 MMC-xxx-xxxx ............38 Technical Drawings - HD 13T22 MMC-xxx-xxxx ............39 Technical Drawings - Accessories ..........41 Technical Drawings - HD CMB SX2-B1 ..............42 Console Mount Kit 7 inch/8 inch ................42 Technical Drawings - HD CMB SX2-C1 ..............43 Console Mount Kit 13 inch ..................
-
Page 5: Contents Of Package
Contents of package Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list. Item Description Illustration 1 x Console Mounting Bracket Kit for 7 inch Models HD CMB SX2-B1 Console Mounting Bracket Kit 7 inch 1 x HD CMB SX2-C1 - Console Mounting Bracket Kit for 13 inch Models HD CMB SX2-C1 Console Mounting... - Page 6 This page left intentionally blank...
-
Page 7: General
General... -
Page 8: About This Manual
Hatteland Display AS About this manual The manual contains electrical, mechanical and input/output signal specifications. All specifications in this manual, due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last update and revision of this manual are shown both on the frontpage and also in the “Revision History” chapter at the end of the manual. -
Page 9: Maritime Multi Computer (Mmc) - Introduction
Compact Panel Computers Series X Maritime Multi Computer (MMC) - Introduction Series X Displays and Panel Computers offer the ultimate in performance, convenience, state of the art design and enduring quality for system integrators and boat builders. Series X products offer a range of feature sets optimized for varying requirements and applications. -
Page 10: Touch Screen Products
Touch screen products Introduction to products with touch screen Nearly all of our products with touch screen use Projected Capacitive Touch screen (PCTS), widely used with great suc- cess on mobile phones and typical pad devices. PCTS can be equally effective also for marine applications. One of the advantages of PCTS is that it has features seen in both resistive and surface capacitive touch screen technologies. - Page 11 Touch screen products Touch Screen Drivers and Documentation All units are shipped with a Documentation and Drivers DVD or CD which contains suitable drivers* for touch screens. (Named MEDIA STD01). You can also visit our website www.hatteland-display.com/archive to view the same list (or even recently new added products) for our models with touch screen.
-
Page 12: Product Labeling
Product Labeling Introduction This section details the locations, content details and specifications for factory mounted labels for all currently available standard Hatteland Display Panel Computer (MMC) models. This information will in most cases also apply for most Customized Models as well, but may differ based on customer requirements, in that case, please refer to the customized User Manual (paper or electronic version, dependent on customer requirements). - Page 13 Product Labeling Label Locations Number ID and coloring based on “Label Size and Types“ table from previous page. All illustrations below are seen from rear (and side where needed) with connectors facing down. Actual labels regarding its size and text orientation vs product size is drawn in.
-
Page 14: Product Labeling
Product Labeling Warranty Label If you are to perform service on a unit still under warranty, any warranty will be void if this label show signs of removal attempts (re-gluing) or removed completely. This label is located on the back of the product and covers a key screw. This is to aid service departments in determining if there has been any unauthorized service on a unit still under warranty. -
Page 15: Installation
Installation... -
Page 16: General Installation Recommendations
General Installation Recommendations First Things First! CORRECT HANDLING! CORRECT HANDLING! IND100148-5 - Rev 05 ATTENTION! To prevent damage to chassis and glass, please review the illustrations ! Place horizontally on a smooth and clean surface (table with cloth) Do not stress the corners, nor p RRECT HANDLING! RRECT HANDLING! WRONG HANDLING! -
Page 17: Installation Limitations
General Installation Recommendations 9. Do not paint the product. The surface treatment influences the excess heat transfer. Painting, labels or other surface treatments that differ from the factory default, might cause overheating. 10. Expose to heavy vibration and acoustic noise might under certain circumstances affect functionality and expected lifetime. - Page 18 General Installation Recommendations General mounting instructions 1. The useful life of the components of all Electronics Units generally decreases with increasing ambient temperature; it is therefore advisable to install such units in air-conditioned rooms. If there are no such facilities these rooms must at least be dry, adequately ventilated and kept at a suitable temperature in order to prevent the formation of condensation inside the display unit.
-
Page 19: Ergonomics
General Installation Recommendations Ergonomics 1. The front surface of the display glass has an anti-reflective (AR) coating which can be scratched and damaged with improper cleaning. It is recommended to use only 90+% pure Isopropyl alcohol (Isopropanol) and a soft fabric cloth for this first cleaning. -
Page 20: Maximum Cable Length
General Installation Recommendations Maximum Cable Length Any cable should generally be kept as short as possible to provide a high quality input/output. The maximum signal cable length will depend not only on the signal resolution and frequency, but also on the quality of the signal output from the computer/radar. -
Page 21: Housing / Terminal Block Connector Overview
General Installation Recommendations Housing / Terminal Block Connector Overview Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-pin, 5-pin) which plug into the connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal block connectors have steering rails, which ensures that it can not be mounted wrong. - Page 22 General Installation Recommendations If your installation requires additional cable fasteners support, please visit and purchase directly from manufacturer: Illustrations below are approximate, actual Housing and Hood may deviate slightly, but function remains the same. Cable Housing - Illustration Cover Hood - Illustration BCZ 3.81 AH05 BK BX (5-pin) KGG-MSTB 2,5/ 2 (2-pin) KGG-MC 1,5/ 5 (5-pin)
-
Page 23: Physical Connections
Physical Connections Connection area of 7 inch unit USB 1,2 RJ45 Network A RS-422/485 Grounding Screw RJ45 Network B USB 3,4 12-24 VDC Power Input Connection area of 13 inch unit USB 1,2 RJ45 Network A RS-422/485 Grounding Screw RJ45 Network B USB 3,4 12-24 VDC Power Input IND100133-60... - Page 24 Physical Connections Note: For connectivity, please review “Housing / Terminal Block Connector Overview“ and “Pinout Assignments” sections in this manual. Network/LAN INPUT / OUTPUT A: Connector is by factory default protected by a Dust Cover, remove it first. Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair cables CAT.5E.
-
Page 25: Operation
Operation MMC Products... -
Page 26: User Controls
User Controls USER CONTROLS OVERVIEW The units are designed using Glass Display Control™ (GDC) touch technology to allow interactivity adjusting brilliance (brightness) and control power on / off with the use of illuminated symbols. Note that these symbols are only visible (backlight illuminated) when suitable power is connected. - Page 27 User Controls Power ON/OFF (HotKey 3): Touching this symbol will either turn on or off the unit. When unit is on (power cable connected), the symbol is not illuminated until the unit has been turned on once, then symbols will illuminate in white color. When unit is off (power cable still connected) after it was previously turned on, the symbol is illuminated in white color (you can even use the (-) and (+) to adjust the intensity of the illuminated symbols when in this state).
- Page 28 This page left intentionally blank...
-
Page 29: Specifications
Specifications... -
Page 30: Specifications - Hd 07T22 Mmc-Xxx-Xxxx
Specifications - HD 07T22 MMC-xxx-xxxx SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. All specifications are subject to change without prior notice! Physical Dimensions: TFT Technology: • W:228.80 [9.01''] x H:156.60 [6.17''] x D:58.10 [2.29"] mm [inch] •... -
Page 31: Specifications - Hd 13T22 Mmc-Xxx-Xxxx
Specifications - HD 13T22 MMC-xxx-xxxx SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. All specifications are subject to change without prior notice! Physical Dimensions: TFT Technology: • W:355.00 [13.98''] x H:248.50 [9.78''] x D:66.31 [2.60''] mm [inch] •... - Page 32 This page left intentionally blank...
-
Page 33: Specifications Accessories
Specifications Accessories... -
Page 34: Specifications - Jh C01Mf A-A
Specifications - JH C01MF A-A This information may not, in whole or in part, be copied, photocopied, DATA SHEET reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way. -
Page 35: Specifications - External Modules (Usb)
Specifications - External Modules (USB) Specifications - External Modules (USB) All specifications are subject to change without prior notice! This information may not, in whole or in part, be copied, photocopied, DATA SHEET reproduced, translated or reduced to any electronic medium or machine- readable form without the prior written consent of Hatteland Display AS. - Page 36 Specifications - External Modules (USB) All specifications are subject to change without prior notice! SPECIFICATIONS Note: All specifi cations are subject to change without prior notice! Please visit www.hatteland-display.com for the latest electronic version. Ordering Details: TypeNumber Description Internal Speci cations (link to separate datasheets) HT 00262 OPT-A1 NMEA COM (Based on PCA100293-1)
-
Page 37: Technical Drawings
Technical Drawings... -
Page 38: Technical Drawings - Hd 07T22 Mmc-Xxx-Xxxx
Technical Drawings - HD 07T22 MMC-xxx-xxxx IND100132-285... -
Page 39: Technical Drawings - Hd 13T22 Mmc-Xxx-Xxxx
Technical Drawings - HD 13T22 MMC-xxx-xxxx IND100132-286... - Page 40 This page left intentionally blank...
-
Page 41: Technical Drawings - Accessories
Technical Drawings - Accessories... -
Page 42: Technical Drawings - Hd Cmb Sx2-B1
Technical Drawings - HD CMB SX2-B1 Console Mount Kit 7 inch/8 inch IND100132-400... -
Page 43: Technical Drawings - Hd Cmb Sx2-C1
Technical Drawings - HD CMB SX2-C1 Console Mount Kit 13 inch IND100132-399... -
Page 44: Technical Drawings - External Modules (Usb)
Technical Drawings - External Modules (USB) IND100132-245... -
Page 45: Appendixes
Appendixes... -
Page 46: Power Mode / Com Config
Power Mode / COM Config Power Mode Power mode is configurable under BIOS setup menu. Advanced -> SCOM BUS Configuration -> Power Mode • Always On (AT Mode) (Computer will start when external power is applied, valid in next power-recycle) •... -
Page 47: Pinout Assignments
Pinout Assignments Connectors illustrated here are either standard by factory default or may be available (through factory customization). Note that some combinations may not be possible due to space restrictions. List also valid for customized models. All pin out assignments are seen from users Point of View (POV) while looking straight at the connector. Please review the dedicated datasheet or technical drawings for your actual unit to identify and determine the presence of desired connector. -
Page 48: Basic Trouble-Shooting
Basic Trouble-shooting GENERAL ISSUES FOR TFT PANEL BASED PRODUCTS Note: Applies for a range of various products. This is only meant as a general guide. O PICTURE / LED BEHAVIOUR: If there is no light at all in the LED at the FRONT, check power cables. If the LED in front is green then check if the brightness is set/adjusted to max brightness. -
Page 49: Declaration Of Conformity
Declaration of Conformity We, manufacturer, Hatteland Display AS, Eikeskogvegen 52, N-5570 Aksdal, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD, HM MIL, HM CMD, HT STD, HD MMD, HM MMD, HM XRD, HM RMD, HT MMC, HD MMC and HT/HM (computers) product ranges is in conformity with the following standards in accordance with the EMC Directive. -
Page 50: Return Of Goods Information
Return Of Goods Information Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse are returned. -
Page 51: General Terms And Conditions
General Terms and Conditions As of January 2015, Hatteland Display AS’ “Terms of Sales and Delivery” and “Warranty Terms” have been substituted by the updated ”General terms and conditions for sale of goods and performance of additional services” (the “General Terms and Conditions”). Further, from January 2015 onward, the previous “Terms of Sales and Delivery”... -
Page 52: Pixel Defect Policy
Pixel Defect Policy PIXEL DEFECT POLICY Dot-defects (Bright or dark spots on the panel) Due to the effect that dot failures are part of the TFT technology such failure occurrence cannot be prevented basically. Even though dot defects usually occur during production process, new defects can appear within the lifespan of a TFT display. Neither the production at LCD-supplier nor the use of a LCD-Monitor after shipment can be influenced by Hatteland Display. -
Page 53: Notes
Notes General Notes: - The unit is type approved according to EN60945 4 th , 4.4, equipment category b) protected from the weather. - Other type approvals applies for the different products. Please see the appropriate “Specifications” page in this manual for more information. - Use of brillance and Glass Display Control™... - Page 54 User Notes Appendix IND100077-24...
-
Page 55: Revision History
Revision History Rev. Date Notes 00-1 27 Sep 2016 Release for internal review. 08 Nov 2016 Final relase for internet. 23 Apr 2018 General updates performed throughout the manual based on latest company profile and specifiations Added indication of new label for DC power polarity marking on unit, page 23 26 Oct 2018 Added HD CMB SX2-B1 (Console Mount Kit) drawings, page 42 Added HD CMB SX2-C1 (Console Mount Kit) drawings, page 43... - Page 56 w ww .hat tel and-di s p l ay . com...
Need help?
Do you have a question about the Hatteland Display Maritime Multi Computer X Series and is the answer not in the manual?
Questions and answers