Table of Contents
Advertisement
English
Dansk
Deutsch
Español
Figure 8
Changing the TV Power
Français
Italiano
Nederlands
1;3(-
01#?-B(/5
%.+->"+;*
01#?-B(/#'+"+.@5
01#9(+(*+(3
01#%@E(*+#<"+;-5
=#=
G;3(@*/((2#919@5
=#=
1;3(-#6-22(*+-/5
6->E-2(2+
1;3(-#&)"*H#7(:()5
I-/>")
0A(#F(3;"#6(2+(/#*"2#+./2#,-./#01#-2#
".+->"+;*")),#BA(2(:(/#,-.#@()(*+#"#:;3(-#@-./*(4
navigate
select
8. Notice the
TV Power Status
•
means the installed TV sensor is working.
TV Detected
•
means the TV sensor (if installed) is not connected or not positioned
TV Not Detected
properly.
• Press System or Exit to leave the System menu.
For cable/satellite control
The cable or satellite that is connected to the CBL• SAT input on your media center is the one
you should select. So when you press the CBL
you are operating that device.
If you own both a cable and satellite box, use the AUX option to designate the second device
brand and code.
Note: For general guidelines on using the LIFESTYLE
Menus" on page 27.
Follow the cable or satellite process below:
Turn on the cable or satellite box (or other video device) that is connected to the CBL• SAT
Audio IN on the media center. Turn on the TV and be sure to select the TV video input that is
connected to the media center. Using the LIFESTYLE
follow the steps below:
1. Identify the device:
• From the Remote Control options in the System menu, select
• Move right and select a device from the multiple options by pressing Enter.
2. Identify the brand:
• In the menu options on the left, select
• Move to the right and up or down in the alphabetical list to locate your brand.
• Press Enter to select the brand.
Svenska
:
•
SAT source button and the On/Off button below it,
®
System menu, refer to "Using System
®
remote control, press CBL
CBL • SAT Brand
! !
C
E
S
ONTROLLING
XTERNAL
SAT and !
•
CBL • SAT Device
.
.
OURCES
23
Advertisement
Table of Contents
