Operating Instructions - General Components LYNX Series Manual

5. OPERATING INSTRUCTIONS

Operation of the unit is very simple and self-explanatory.
It could be done via remote control or control panel on the unit
itself. When a button pressed on the remote, the unit should
beep once to acknowledge the command.
 Use ON/OFF power button to turn the unit on and off.
 Use MODE button to switch between Cooling, Fan and
Auto modes.
 Use TEMP (up) (down) buttons to adjust desired
setpoint.
 Use FAN SPEED buttons to adjust indoor fan speed.
 Use LCD button to toggle between ℃ and ℉ display.
info@generalcomponents.ca
+1 (800) 517-7740