let's face it
6) screw attachment
3. Before the frame has been mounted to the door; To attach your handle hardware, at the
height of your choosing, within the same gasket slot, drill counter sunk screw holes to align with
your handle.
6.
6
door frame as a template,
using the ST4-30 self-tapping screws provided and a phillips head screwdriver, install one screw
into each of the ten holes and hand tighten flush with the frame.
DO NOT OVER TIGHTEN AS SCREWS MAY STRIP OUT.
6
S
SCREW
HOLE
LOCATIONS
11