Installation; The Miele Waterproof System; Water Inlet - Miele G 7100C Operating Instructions Manual

Installation

The Miele Waterproof system

Provided that your dishwasher has
been installed correctly, the Miele
Waterproof system will protect you from
water damage throughout its lifetime.

Water inlet


Danger to health due to wash
water.
Water in the dishwasher is not
drinking water.
Do not drink any water from the
dishwasher.

Health risk and risk of damage
due to contaminated inlet water.
The quality of the incoming water
must correspond to the drinking
water specification of the country in
which the dishwasher is being
operated.
Connect the dishwasher to a drinking
water supply.
84
The dishwasher may be connected to
cold or hot water (up to max. 65 °C)
supplies.
If energy-saving water heating sources
such as solar energy circulation
systems are used, we recommend
connection to the hot water. This saves
both time and electrical energy costs.
Hot water is used in all programmes.
The programme (if available)
SolarSave
requires a hot water connection of
between a minimum of 45 °C and a
maximum of 65 °C (inlet temperature).
The higher the water inlet temperature,
the better the cleaning and drying
results.
The inlet hose is approx. 1.5 m long. A
1.5 m long, flexible metal extension
hose (tested to 14,000 kPa/140 bar) is
available as an optional accessory from
Miele specialist retailers or the Miele
Customer Service Department.