Unsatisfactory Washing Result - Miele G 7100C Operating Instructions Manual

Unsatisfactory washing result

Problem
The crockery is not
clean.
There are smears on
glassware and cutlery.
There is a bluish sheen
on the surface of
glassware. The film can
be wiped off.
Cause and remedy
The crockery was not loaded correctly.
 See notes in the "Loading the dishwasher" for
examples on how to load crockery and cutlery.
The programme was not powerful enough.
 Select a more powerful programme (see
"Programme overview").
 Activate the Extra clean function (see "Settings –
Extra clean").
Not enough detergent was dispensed during manual
detergent dispensing.
 Use more detergent or change the detergent you
are using.
Items are blocking the path of the spray arms.
 Carry out a rotation check and if needed rearrange
the items so that the spray arms can rotate freely.
The filter combination in the wash cabinet is not
clean or was incorrectly fitted.
This may have caused the spray arm jets to become
blocked.
 Clean and/or fit the filter combination correctly.
 Clean the spray arm jets if necessary (see
"Cleaning and care – Cleaning the spray arms").
The rinse aid dosage is set too high.
 Reduce the dosage (see "Settings" chapter, "Rinse
aid" section).
Problem solving guide
77