PE micro Cyclone Series Developer's Manual page 58

Cyclone Automated Control Package
0x00C1: Specified Ethernet IP address is incorrect.
0x00C7: The Cyclone PRO device is not ready. Please check power and
connections.
0x00C8: Error in configuration script.
0x00C9: Error erasing Cyclone images
0x00CA: Error adding a Cyclone image
Execution related error codes:
U
0x0001: Unable to detect target communication speed.
0x0002: Unable to enter debug mode.
0x0003: Operation cancelled by user.
0x0004: Error writing data byte block.
0x0005: Error writing data byte block.
0x0006: Error during execution.
0x0007: Error enabling module.
0x0008: Error enabling module.
0x0009: Error enabling module.
0x000A: Error testing target timing.
0x000B: Error reading data byte block.
0x000C: Error un-securing 9S12 target.
0x000D: Error un-securing 9S12 target.
0x000F: Stand alone operations for the Cyclone PRO are not configured.
0x1001: Blank_Check_Word Algorithm is not supported.
0x1002: Blank_Check_Byte Algorithm is not available.
0x1003: Error during blank checking device using blank_check_byte algorithm.
0x1004: Error during blank checking device using blank_check_word algorithm.
0x2003: Error during erasing device.
0x2004: Error during erasing device.
0x3001: Program_Word Algorithm is not supported.
0x3002: Program_Byte Algorithm is not available.
0x3003: Error during programming device.
0x3004: Error during programming device.
0x3005: Error during programming device.
0x3006: Error during programming device.
0x5003: Error during verifying module.
0x5004: Error during verifying range.
0x6003: Error during user functions.
58