Firmware Update; Web Interface (After First Configuration); Device List Menu - process-informatik CONNECT Series Operation Quick Start Manual

Web interface (after first configuration):

Open the CONNECT web interface by clicking "http://192.168.1.1" in your browser with an active WIFI-
connection. Or connect your PC to the in the first-configuration specified PC-interface using a LAN-cable and
enter "CONNECT" in the address-line of the browser.
Click on the 3 stripes in the top left to open the device menu :
Overview
–
State
–
Configuration
–

Firmware update

–
Menu overview (overview of the device) :
The menu is divided into status and device list. Clicking on the respective area opens a corresponding window.
All other menus are shown in this menu frame .
The status display shows parameters of the connection, error messages and information about the connected
devices :
The Device list menu shows all devices available in your cloud. You can also establish and end connections to
the other devices.