Advantech UCAM-120 Quick Device Installation Manual

Pre-installation Guide
Supported Height of Installation
Supported Tile Angle
Mount The Device
Recessed
Mounting
Use bundled recessed mounting bracket for mounting. Insert device with its signal light s facing the bracket
and grip it with two swiveling clamps.
Install Device On Site
Install one single device when the entrance width is not greater than 3.2m.
Single Device
Step1: Where to install the device?
Automatic
Sliding Door
Rotation Door
Push/Pull Inward
Opening Door
Step2: How to Install?
Follow Step1 to
decide the best
position. Drill a
hole using a
hole saw.
2.5m – 5m
-10° – 10°
Install device in the middle and keep a
20-60 cm distance from the door.
Install device in the middle and keep a
20-40cm distance from the door.
Install device in the middle and keep a
distance greater than the door width.
Follow 'Mount The
Device' to mount TD
sensor into the
bracket and connect
Ethernet cable from
the reverse side.
www.ushop-plus.com
UCAM-120 Counting Camera
Quick Device Installation Guide V1.0
Front Side
Install here
Insert the
mounted device
into the hole
opened. Fix it
with screws with
front side
downward facing.
Reverse Side
Avoid Exist sign and
any obstacles like air
curtain.
Install here