Page 4
Fix the Centre Rail Cup (D) into the pre - drilled holes on the lower rail of the Headboard (1) and footboard (2) using Screw (E), as shown in the diagram below.
Page 6
Lower the Centre Rail (4) onto the Centre Rail Cup (D) on the Headboard (1) and Footboard (2) as shown below. Insert the Centre Connector (C) along the Centre Rail (4) into the pre drilled holes. Next, insert a slat (5) into a Centre Connector (C).
Page 7
Wooden furniture should be cleaned using a so ft damp cloth and dried immediately. Do not use a very wet cloth or allow any liquid contact for a long period of time as this can permanently damage the surface. Do not use abrasive cleaner or hard detergents as this can damage the surface. Do not drag any object across the bed as this can cause permanent damage.
Need help?
Do you have a question about the Lancaster and is the answer not in the manual?
Questions and answers