Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Silentnight Minerve
Summary of Contents for Silentnight Minerve
- Page 1 KINGSTON PINE BED, DOUBLE customer services on 01244 689949.
- Page 3 Bolt Bolt Rail Cup x 2 Key x 1...
- Page 4 Fix the Centre Rail Cup (G) onto the pre - drilled holes on the lower part of the Headboard (1) and Footboard (2) using M4 Screw (H), as shown in the diagram below.
- Page 5 Start by placing the Dowels (C) into the holes on the top part of the Headboard (1) and Footboard (2). Allen Key (I), as shown in the diagram below.
- Page 6 Fix the Side Rail (4) to the Headboard (1) and Footboard (2) using M8 Bolt (A), Tighten using Allen Key (I), as shown below. Lower the Centre Rail (5) onto the Centre Rail Cups (G) on the Headboard (1) and Footboard (2) as shown in the diagram below.
- Page 7 Five Insert the Slat Connector (E) along the Centre Rail (5) into the pre - drilled holes. Next, insert a Slat (6) into a Slat Connector (E). Then place a Cap End (D) onto the other end of the Slat (6). Finally, fully push the Cap End (D) into the pre - drilled holes on the Side Rail (4).
- Page 8 This Kingston Pine Bed should be cleaned using a soft damp cloth and dried immediately. Do not use a very wet cloth or allow any liquid contact for a long period of time as this can permanently damage the surface. Do not use abrasive cleaner or harsh detergents as this can damage the surface.
Need help?
Do you have a question about the Minerve and is the answer not in the manual?
Questions and answers