Iconix FX21 User Manual page 16

4. BAUD RATE SETTING
Select from the range 1200, 2400, 4800, 9600, 19200, 38400, 57600.
Use the ZERO key to change the setting.
To accept the displayed setting and step on to the next parameter, press WEIGH.
Baud rate is the rate of data transfer via the RS232 serial port. The FX21 is factory set
to 19200 for high speed data transfer when uploading records to a computer with the
Iconix WinFX Linker programme. It must be changed to 4800 for use with the Iconix FX
Printer.
5. DISPLAY RELEASE
Use the ZERO key to change the setting.
To accept the displayed setting and step on to the next parameter, press WEIGH.
The standard factory setting is Display Release OFF, which in HOLD mode keeps the
last weighing locked on the display, until the next weighing. For Display Release ON,
when the animal that has been weighed is moved from the scale, the displayed weight
will not remain locked on the display.
6. WEIGHT UNITS
Use the ZERO key to change the setting.
To accept the displayed setting and step on to the next parameter, press WEIGH.
The standard factory setting is kg. If pounds are selected, the scale calibration is
changed accordingly, and printouts will show LB.
7. LANGUAGE
Use the ZERO key to change the setting.
To accept the displayed setting, press WEIGH.
The display messages and printouts are shown in the selected language. There are
English, Spanish, German and French versions of the front panel decal. The language
setting should match the decal.
After the Language setting has been viewed or modified, WEIGH is pressed for the
'TBvFe'
final time.
returning to the normal weighing mode.
Page 12
is displayed while the settings are being stored, before
'c/2:311'
for example
'sFMT/Po'
if enabled
'sFMT/PG'
if disabled
'IH'
for kilograms
'Mc'
for pounds
'FoHMTI'
for English
'FTQBoM'
for Spanish
'eFVuti'
for German
'GsBoDF'
for French
FX21 User Manual V5.01+ 14Dec07