Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RightAngle 4 HV Series
Summary of Contents for RightAngle 4 HV Series
- Page 1 K&A Manufacturing 6703 Zinser Street Schofield, WI 54476 Phone: 800.298.4351 Fax: 866.882.9475 www.raproducts.com 6/13/17 Series 4 HV Single Monitor Lift Assembly Instructions Read all the instructions before beginning. Instruction # 53376 Hardware Pack # 53368 Page1 OF 6...
- Page 2 Tools Required for Assembly: Power Driver W/Adjustable Torque #2 Phillips Head Driver Bit #2 Square Head Driver Bit Phillips Screwdriver K&A Manufacturing 3/16" Hex Head Driver Bit or 6703 Zinser Street Schofield, WI 54476 Phone: 800.298.4351 Allen Wrench Fax: 866.882.9475 www.raproducts.com Level Square...
- Page 3 Step 2: Using a cordless drill and a #2 phillips head driver bit, drive (16) slim fix bolts 1 into the back panel 3 and the kick panel 4 ; (8) in each panel. K&A Manufacturing 6703 Zinser Street Schofield, WI 54476 Step 3: Using a phillips screwdriver, make sure that Phone: 800.298.4351 Fax: 866.882.9475...
- Page 4 Step 4: Lay the column assembly 8 assembly on the back panel 3 as shown below. Step 5: Attach the bottom plate of the column K&A Manufacturing 6703 Zinser Street Schofield, WI 54476 assembly 8 to the back panel 3 by screwing (4) Phone: 800.298.4351 Fax: 866.882.9475 machine screws 12 through the back of the...
- Page 5 Step 9: Lay the left leg assembly 10 on a protected surface with the threaded screw holes facing up. Attach the left side panel 5 to the leg assembly with (3) machine screws 14 . The long side must face the K&A Manufacturing 6703 Zinser Street Schofield, WI 54476 back.
- Page 6 Step 13: Insert the (8) slim fix bolts 1 in the kick panel 4 into the connector cams 2 pre-installed in the left side panel 5 and the right side panel 6 . You may need to move the side panels slightly to K&A Manufacturing 6703 Zinser Street Schofield, WI 54476 align the bolts with the cams.
Need help?
Do you have a question about the 4 HV Series and is the answer not in the manual?
Questions and answers